# Bunche 2221E - MQE Main

### Equipment

- - 1x LG86TR3DJ Touch Screen Display (Center)
    - 2x LG 86in TV (Left and Right)
    - PTZ Conference Camera (Vaddio) (Back pillar)
    - 9 Speakers in ceiling
    - 6 Microphones in ceiling
- ##### AV Cabinet
    
    
    - - Windows 11 PC
        - Audio Interface
        - Ethernet extension routing for HDMI
        - OneLink Bridge Box (USB interface for Vaddio Camera and Shure Mics)
- ##### Lectern
    
    
    - - Lectern monitor to Local Windows 11 PC 
            - Keyboard and Mouse
        - Anker USB-C Adapter for External Laptop Input 
            - Unifies HDMI, Ethernet, Touch Screen and OneLink Bridge.
            - USB Ports 
                - Touch Screen - For now Windows only as it appears MacOS treats the display as a keyboard
                - OneLink Bridge USB 
                    - Microphone - Podium Mic (Mic 1) = Shure ULXD8 G50 (Freq 470-534)
                    - Lavalier Mic (Mic 2) = Shure ULXD1-G50 (Freq 470-534)
                    - Vaddio Camera
    - Inside podium (on bottom) there is a base where the wireless Lav can be dropped in to charge (if they have the rechargeable batteries installed).

### How-To

#### Local PC Setup

Ensure Desktop PC in the AV Cabinet is powered on.

- Make sure Local PC is selected on the Crestron Control Tablet
- If system was shutdown, it may take a few minutes for TVs to power up.

#### Using a laptop on the Lectern

Ensure the laptop is plugged into the Anker USB-C adapter. On macOS you may need to allow the USB-C device to connect. If a laptop does not have USB-C, please ask Amy to borrow the loaner HP Laptop.

- Once connected, grab the Crestron control tablet
- On the left of the tablet, select "Laptop"
- Your computer should show up on the monitors - this may take a few seconds (also make sure your computer is not asleep)
- Open Zoom

##### Audio

- For audio, you may have to select in your preferences "OneLink Bridge" for input and output in Zoom.
- Ensure on the Audio Tab of the Crestron Control Tablet that the appropriate microphone is unmuted and the recording levels are set high enough.
- Room microphones can be controlled by the Room mic button. Mics are active when rings are lit green. Mics are off when lights are off.

##### Video

- For video, you may need to select the OneLink Bridge in Zoom to use the camera at the back of the room.
- Go to the Camera tab on the Crestron Control Tablet to adjust camera positioning. Press and hold preset buttons for 3-5 seconds to save presets.

#### 2249 Overflow Setup

##### Equipment

- Crestron Soundbar w/Camera
- LG TV
- Laptop

##### Back of Room

At the back of the room there are ports for a laptop to be connected to host a zoom session. Preferably this should be connected to a USB-C Hub

- Ethernet - for Zoom
- USB Host Cable - For Crestron SB1 Soundbar
- HDMI - Video for TV
- Plug USB-C Hub into Laptop

##### Audio

- Ensure that in Zoom the Crestron SB1 Soundbar is selected for audio input and output.
- Mute the microphone if overflow room isn't going to be participating.

##### Video

- Select SB1 Crestron Soundbar (Huddly) if you wish to use the camera in the soundbar.